← Back to Services

Maintenance Programs

Assuring a reliable water resource is an ongoing effort. Well and pump hydraulic characteristics should be continuously monitored. Municipal Well & Pump’s preventative maintenance program documents well performance while assuring proper operation of well equipment and monitoring controls.

All MWP services are performed and overseen by a certified operator as required by the Wisconsin Department of Natural Resources (DNR).

A typical well and pump maintenance would include the following as they apply to your system:

I. Collection and submittal of water sample for bacteria analysis.

II. Operation Check of:

  1. Each well pump
  2. Each Booster Pump
  3. Air charge system
  4. Float control system
  5. Electrical controls
  6. Static water level
  7. Pumping water level
  8. Amperage draw and voltage check of submersible motors
  9. Air to water balance in elevated tank and reservoir
  10. Heating and ventilating system
  11. Air release and vacuum breakers
  12. Inspection of lighting system
  13. Inspection of general building structure
  14. Adjustment of packing glands
  15. Greasing of packing glands
  16. Insulation check on electrical cable for submersible pumps
  17. Resistance check on submersible motor windings
  18. If allowable, valves in pump-station are worked, ie: opened and closed to ensure proper operation in the event they may be needed
Contact Us

For More Information